Displaying items by tag: emtec electronic

High Paper Quality by Application of Quality Equipment

This year the “Asian Paper 2015” will take place in Jakarta, Indonesia and the company emtec Electronic GmbH will attend. From April 28^th until 30^th, the company will present different paper testing equipment at booth no. C27.

In the wet end of the paper production process it is extremely important to have detailed information about the charges of particles in the pulp suspension, which can be determined by CAS Charge Analyzing System. Also important is the knowledge about the surface charge of the pulp fibers, which can be measured with the FPA Fiber Potential Analyzer. Furthermore, emtec Electronic developed a new Online measuring device FPO Fiber Zeta Potential Analyzer Online, which measures the Zeta Potential of fibers directly in the production process.

In addition to the wet-end, it is necessary to get information about the quality of the base and final products. Therefore emtec will present the EST12 Surface & Sizing Tester in Jakarta, which characterizes the process relevant surface parametersof paper and board in order to predict its converting properties. Additionally, the TSA Tissue Softness Analyzer will be shown, which gives reliable and objective information about the “hand feel” and different softness parameters of tissue products.

In summary, the application of all these measuring devices leads to the optimization of the production and converting processes to gain the best possible quality at the lowest possible costs.

emtec Electronic at the IMPS 2015 in Munich

This year the IMPS – International Munich Paper Symposium will take place the 24th  time and emtec Electronic GmbH will attend the event with a booth in Munich, Germany. From March 11th until 13th, emtec will present different special technical equipment – interesting for all players within the paper, board and tissue industry.

With the application of the special testing equipment it is possible to control and guide the complete process of paper, board or tissue production from the pulp to the finished product into the right direction, in order to get an efficient process and the best possible quality with the lowest possible costs.

This year, the company, located in Leipzig, will present a measuring device for the wet end of production. There it is extremely important to have detailed information about the surface charge of the pulp fibers, which can be measured with the FPA – Fiber Potential Analyzer. Furthermore, emtec Electronic developed a new Online measuring device FPO – Fiber Zeta Potential Analyzer Online, which measures the Zeta Potential of fibers directly during the production process and delivers immediately reliable and necessary information concerning the dosing of chemicals to the pulp.

A further new development of the company is the innovative ACA – Ash Content Analyzer, which determines the total mineral filler content as well as the percentage content of the typical fillers in the paper industry within seconds without combustion of the samples, i.e. nondestructive.

Beside these new measurement equipment, the EST12 – Surface & Sizing Tester will be presented, which makes it possible to predict the behavior of paper surfaces during converting processes like glueing, coating and printing.

For the tissue industry emtec comes up with the TSA – Tissue Softness Analyzer, which determines the softness very fast and objectively.

Gaining the Best Tissue Quality with Lowest Possible Costs

emtec Electronic at the Tissue World in Barcelona, Spain

Also this year emtec Electronic GmbH will attend the „Tissue World Barcelona 2015“ in Barcelona, Spain. From March 17th  until March 19th, the company will be present at the exhibition at booth no. E600.

The TSA Tissue Softness Analyzer is one of the innovative testing instruments which will be presented in Barcelona during these three days of exhibition. The device is used for the objective and reliable measurement of tissue “handfeel” properties such as the real softness, smoothness / roughness and stiffness. The availability of these three parameters opens a huge amount of chances for the optimization of the tissue production and converting processes.

Additionally, emtec Electronic will present some measuring devices for the wet end area: the CAS Charge Analyzing System for determining the particle charge of filtrates and the FPA Fiber Potential Analyzer for measuring the Zeta Potential of fibers.  Furthermore, emtec Electronic developed a new Online measuring device FPO – Fiber Zeta Potential Analyzer Online, which measures the Zeta Potential of fibers directly in the production process and delivers immediately reliable and necessary information concerning the dosing of chemicals to the pulp.

Optimization of the Production Process of Paper and Board

emtec Electronic GmbH will participate at the IV Annual International State-of-the-Art Conference 2015 at the KRONA Institute in St. Petersburg in Russia with the topic “Modern Systems for Paper and Board Quality Control”. On 18^th February, Ms. Elena Beznosova will speak about “Predicting the surface behavior of paper and board during glueing and printing processes” and present some different Paper Testing Technology to optimize the production process of paper and board from the pulp to the finished product with the goal getting an efficient process and the best possible quality with the lowest possible costs.

For efficient process optimization, it is essential to look at both, the wet and dry end of paper and board production. In the wet end, it is extremely important to have detailed information about the charges of particles in the pulp suspension, which can be determined by the CAS – Charge Analyzing System. Also important is the knowledge about the surface charge of the pulp fibers, which can be measured with the FPA – Fiber Potential Analyzer. Furthermore, emtec Electronic developed a new Online measuring device FPO – Fiber Zeta Potential Analyzer Online, which measures the Zeta Potential of fibers directly during the production process and delivers immediately reliable and necessary information concerning the dosing of chemicals to the pulp.

In addition to the wet-end, it is necessary to get an idea of the quality of the base paper after the production for further steps within the conversion. This can be realized by the EST12 – Surface & Sizing Tester, which gives reliable and objective information about the surface sizing respectively hydrophoby and the surface pore structure to predict the behavior of paper and board during glueing, printing and coating processes. How this functions will be explained in detail by Ms. Elena Beznosova during her presentation on site.

Contact:
Sandra Vogt    
emtec Electronic GmbH    
Gorkistr. 31    
04347 Leipzig
Germany        
Tel:  +49 (0)341 245709-35
Fax:  +49 (0)341 245709-39
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
WEB: http://www.emtec-papertest.com

The company emtec Electronic GmbH from Leipzig in Germany expands its worldwide representation network by a cooperation with the company ODL Paper Service. As of now, Mr.Thierry Onder de Linden is the contact person for interests and questions concerning all products of the German producer of measuring devices.

He took over the consulting and distribution activities for emtec Electronic in France, Belgium, Luxembourg and the Netherlands.

Further information at www.emtec-papertest.com