Friday, 26 June 2015 09:51

emtec Electronic at RosUpack 2015

Written by 
Rate this item
(0 votes)

Innovative Tools to Optimize Production and Converting Processes

emtec Electronic looks back to a successful exhibition week at the RosUpack 2015

The company emtec Electronic GmbH attended the Russian „RosUpack 2015“ in June in Moscow. In the red emtec corner in hall 2 of the exhibition, visitors were able to talk to specialists from emtec in Germany and from the representative company Sigma Micron in Russia. In particular, producers and converters of paper and board as well as suppliers of chemicals, glue, coating color, printing ink, but also institutes can indeed be very well supported by the emtec measuring instruments.

2015 06 26 094945

In the converting process of paper and board sometimes problems occur in the gluing, coating and printing process, but the reason is unclear, as the specifications are according to standard testing instruments. Nobody knows if it is due to the quality of the paper or the glue, coating color or printing ink.

The company emtec developed a method to find out the reason. In Moscow one of the solutions was presented - the EST12 Surface & Sizing Tester. In order to predict the interaction between paper or board and the liquid during coating, printing and gluing, the device characterizes the surface parameters of paper and board, which are relevant for the converting process, in the process-relevant time. Its application leads to the optimization of the production and converting processes and therefore to reducing the costs and achieving respectively improving the quality of the product.

Problems in the quality of the finished product can also be caused by non-optimal process control in the wet end area of paper and board production. emtec Electronic has presented two essential measuring devices for the optimization of wet end area: the CAS Charge Analyzing System for determining the particle charge and the FPA Fiber Potential Analyzer for measuring the Zeta Potential of fibers in the suspension. Both help to guarantee and improve the targeted properties of finished products and to reduce the consumption of chemicals.

Read 2728 times